If the release of thick blister can be solved

The design principle of blister molding machine: blister molding technology is also called thermoforming. This kind of development molding processing technology is mainly to use the vacuum suction force generated by the electronic vacuum pump to soften the heated pvc, pet, petg, pc, pp, Thermoplastic plastic sheets such as pe and ps are blister-formed into vacuum covers of various shapes through a mold, or attached to the surface of various complex-shaped information products. According to the thickness of the board, it is divided into thin and thick plates.

The quality of thick blister products is inseparable from the mold production, especially the mold release problem. In order to prevent the thick blister from deforming after demolding, the user is first required to check the temperature of the cooling water , At the same time, the water of the sprinkler. Perform conditioning to meet the specified scale. Secondly, it is necessary to adjust the wind direction in each direction in order to find the right pressure for the production of thick blister. The release of the teacher. The application of the pressure in the vibration mode of the smooth jet force can be increased if the two air volumes at the bottom can be appropriate to ensure the quality of the plastic product is also helpful. If the problem cannot be solved through these, the upper mold can only be remanufactured to effectively solve the problem of deformation. According to the characteristics of the thick film blister technology, choose the equipment that meets the needs, which can not only increase the pass rate of the product, but also increase the production efficiency and reduce Tian Longben. According to the requirements of the actual operation, choose automatic or manual blister equipment, and match the corresponding number of operators to carry out large-scale blister operations in a good state.

Next:Nothing